What kind of High Pressure Washer best for Paint Removal?

High Pressure Washers best for Paint Removal

High pressure washer, also called Power washer, are effective tools for cleaning the outside of a house. They also work well to remove flaking and peeling paint from wooden siding before you repaint. However, it's important to get the right size machine for the job. A DIY high pressure washer that provides too little pressure won't remove all the paint. One that sprays with too much power will take off the paint, and also damage the wood underneath.

Minimum Size
Use High pressure washers from 1,200 psi to around 2,000 psi to clean surfaces before painting but don't expect them to remove much paint. Stronger machines, starting at about 2,500 psi, work better to take off flaking or peeling paint. For more stubborn jobs, consider a 3,000 psi pressure washer, which can exert the force needed to break paint off the surface of the wood.

Start by covering all outdoor lighting and electrical fixtures with plastic bags, closing the doors and windows and covering landscaping plants and lawn. Wear goggles and protective clothing to prevent damage from pressurized spray. Hold the nozzle between four and 12 inches from the painted surface, at about a 45 degree angle, to remove paint from wood. Avoid spraying under the laps of siding, or into vents, since this can cause moisture problems later.

According to Sutherlands paint company, very high powered pressure washers can damage wood or other paint substrate. Avoid using a pressure washer over 3,000 psi. Instead, work slowly and carefully to remove all flaking paint. Paint that won't come off from 3,000 psi or less can be hand scraped or simply painted over, as it is unlikely to peel.

Using a High pressure washer makes things easier, but it won't keep you from having to hand scrape some parts of the house. Water blasting removes most of the peeling or blistered paint, but also tends to make the edges of remaining paint areas curl up. Allow the siding to dry, then use a scraper on these areas before painting to ensure a flat surface.

Read more :


How,to Use a Steam Cleaner on cleaning a Shower Door?

Steam cleaners use an internal heating element to bring water to a boil inside the reservoir. The resulting steam becomes a natural cleaner without the help of chemical additives. Using steam to clean the surfaces around your home can help kill bacteria, such as salmonella, E. coli and listeria. Using a steam cleaner on a shower door can loosen the natural adhesives that bind dirt and grime to the surface, allowing you to wipe away soap scum with a soft cloth.

Things You'll Need:
--Tap, distilled or dematerialized water


1.Fill the steam cleaner reservoir with tap, distilled or dematerialized water. Your model may use a fill cup to measure the correct amount of water or could have a fill-level mark on the exterior of an opaque reservoir.

2.Plug the cleaner into a grounded electrical outlet to heat the water in the reservoir. Depending on your model, you may need to turn on the steam cleaner to heat the water.

3.Observe the indicator light. The light turns off once the water in the reservoir has reached the steamer’s preset temperature to create steam.

4.Hold the tip of the cleaner about 4 to 6 inches away from the shower door to warm the glass. Cold glass could shatter from the heat of the steam if introduced too quickly. Move the steamer back-and-forth across the shower door to warm the entire surface.

5.Move the tip of the cleaner to within 1/2 inch of the shower door. Move the steamer slowly across the surface. Concentrate the steam against the glass for at least five seconds to loosen dirt and kill any bacteria. Follow each pass of the cleaner with a clean cloth to remove the grime from the glass.

6.Continue to move the steamer slowly over the shower door to clean and disinfect the surface thoroughly. Unplug the steam cleaner before refilling the reservoir if applicable.

Read more :


Here are The Best Steam Cleaners for Grout

Chemical-laden and fume-heavy bathroom cleaners aren’t the only way to clean tile and grout. Hot steam at a high pressure kills bacteria, eliminates grime and restores grout to a like-new condition. Steam cleaners come in an endless array of styles, from small handheld to heavy-duty cylinder units. The best ones feature specific attributes that ensure your grout gets as clean as possible with little to no scrubbing on your part. If grout is exceptionally discolored, scrub it down with low-fume oxygen bleach diluted in water, and then use your steam cleaner regularly to keep stains and bacteria at bay.

Power and Temperature Matter
Outside of removing dirt, grime and stains, one of the benefits of steam cleaning grout is the ability to disinfect it, which is especially important on tile countertops and floors. But if the steam cleaner doesn’t reach the optimal temperature at the tip of the nozzle, it’s impossible to sanitize or disinfect. Choose a product that reaches at least 158 degrees Fahrenheit at the tip, the ideal temperature for sanitizing. To disinfect, purchase a steam cleaner that reaches 212 degrees. Keep in mind that while the tank may heat the water to 212 degrees, steam cools rapidly as it flows through the hose and out of the nozzle; therefore, the tank needs to heat the water higher than the desired temperature. But hot water can only do so much. The best steam cleaners use a combination of high temperatures and high pressure to restore grout. Look for the highest wattage possible when choosing a steam cleaner; the more power the unit has, the more pressure it produces.

Save Time With a Large Tank
Base the size of your steam cleaner on how much tile you have in your home. If it’s only present on the bathroom counter, a steam cleaner with a 6-ounce tank is best, lasting about 10 to 12 minutes. But if your kitchen features a tile backsplash and counter, tile covers your shower enclosure from floor to ceiling and grout lines the floor of your mudroom, a larger tank is best. Household steam cleaners with 48-ounce tanks work continuously for 45 to 50 minutes, providing ample cleaning time before you need to refill. Duration of use varies by manufacturer; one 48-ounce steam cleaner may work for more or less time than another same-size unit.

Opt for Multiple Attachments
When purchasing a household appliance, ensuring that it tackles more than one cleaning task to give you the biggest return on investment. Even if you only plan to steam-clean your grout, you may find the product suitable for other projects, including disinfecting upholstery, spot-treating carpet and releasing wrinkles from clothes. For steam-cleaning grout, opt for a product with a floor nozzle and a detail nozzle. The former will clean the entire floor and the surface of the grout, while the detail nozzle gives a deep clean along grout lines and in hard to reach areas. A small scrubbing brush attachment is also beneficial. The best steam cleaners for grout come with extension rods for the attachments, allowing you to reach the uppermost crevices of your shower enclosure or bathroom wall.

Nice-to-Have Features
The available bells-and-whistles take an average steam cleaner up a notch, making it the best product for you. An on-demand nozzle with a locking switch allows you to stop and start cleaning at a whim, while the locking switch gives you the option of continuous steam, preventing the need to keep your hand clamped down. Steam cleaners with large tanks are best when the tank has wheels attached, making moving the heavy appliance around easier. A flexible hose makes it possible to twist and turn as you clean, effectively removing dirt, grime and bacteria from tile behind toilets, along a backsplash behind a stove and other tight spaces. A long power cord, at least 12 feet, allows you to clean a large area without constantly unplugging and relocating the steam cleaner.

Read more :