How to Steam Clean Tile Floors

Steam Clean Tile Floors

Steam cleaning carpets and upholstery is a common practice; however, steam cleaning tile floors is not so typical, because most people still use mops to clean them. The process of steam cleaning tile is effective—hot steam has the ability to free stuck-on grime and dirt (even in the grout lines) while sanitizing the floor. Always check with your tile and grout manufacturers before steam cleaning your tile floor to make sure it's safe and you don't void any kind of warranty.

Things You'll Need：
--Water
--Rag
--Home Steam cleaner

Instructions

1.Sweep the floor to remove all dirt and debris.

2.Set up your home steam cleaner according to manufacturer instructions, usually by filling up the water tank (often with hot water) and then attaching the tank back on the steamer. You do not need to add any cleaner.

3.Use an attachment with an opening about 4 to 6 inches long and an inch wide, if possible.

4.Turn the steamer cleaner on, and go over one row of tile. As you go, wipe up any residue with a clean wet rag. Continue up and down each row, until your floor is complete, rinsing the rag with clean water as necessary.

5.Attach the wand tool with the smallest opening so that the steam that comes out is concentrated.

6.Go back over the grout (make sure it's in good condition and not crumbling) with the wand tool, holding it about 1 to 2 inches away. Go slowly, letting the steam and water clean the fine grout lines. Wipe away the wet residue as you go with the rag. Continue to rinse the rag in clean water as necessary.

http://www.morck-cleaning.com/