New model--steam cleaner |
Things You'll Need:
1.MK-JJB-208 Steam Cleaner
2.MK-JJB-208 set of attachments
3.MK-JJB-208 instruction manual
4.Cold water
5.Cloths and paper towels
Instructions
1.Read the instruction manual supplied with the cleaner carefully before using to ensure you take the necessary safety precautions. These are very important as the dry steam produced by the cleaner is around 212 degrees Fahrenheit. Care should be taken not to direct it at yourself, other people or animals.
2.Remove the water tank from the body of the cleaner and fill it with cold water ensuring it does not rise above the maximum level indicator. Re-attach the tank to the machine, making sure the cap is firmly in position.
3.Decide which attachment you need for the surface you want to clean.
Three round brushes (two purple and one white): In the machine's instruction manual, Hoover suggests using the two purple brushes for kitchen cleaning and reserving the white brush for bathroom cleaning such as the toilet seat and tile grouting.
Jet nozzle: This is used to concentrate steam. It increases cleaning power and helps to remove dirt and grime from small, narrow areas such as the base of faucets.
Turbo nozzle: This is used to make the steam jet narrower or wider depending on the size of the surface to be cleaned. It is the nozzle which should be used when cleaning windows or mirrors.
Triangular brush: This is used to clean larger areas such as floors and walls. The cloth should be placed over this brush as it will immediately remove the dirt and grime loosened by the steam.
Mop pad: This is used to clean large areas of flooring or walls. The sponge on the underside of the pad both cleans and dries these surfaces.
Telescopic handle: This is used to transform the cleaner into a steam mop and to increase its reach when cleaning above floor level.
4.Turn the on-off knob to the off position before plugging the cleaner into the electricity supply. Attach the appropriate nozzle for your first cleaning task and switch the machine back on. The red indicator light will flash until the steamer heats up. When this happens, the light will remain on constantly.
5.Begin cleaning. The flow of steam can be lessened and increased using the on-off/adjustment knob. Wipe the surfaces to which steam is applied immediately with an absorbent cloth to remove all traces of dirt and grease.
6.When you finish cleaning, disconnect the machine from the electricity supply and allow it to cool down.
7.Empty the water tank and replace in the steamer. Wind the steam cleaner's electric cable around the retractable metal hook on the bottom before storing the machine
Tips & Warnings
If traces of deeply ingrained dirt remain after cleaning a surface, treat the area with a little household detergent and apply the steam cleaner again.
Avoid losing any of the cleaner's attachments by storing them beside it in the plastic bag provided with the machine.
When cleaning windows, warm the glass first by directing the steam jet at it from a distance of no less than six inches. This will prevent the glass from shattering due to thermal shock.
Do not run the cleaner at its highest steam setting for more than 10 minutes at a time.
Do not use the cleaner continuously for more than one hour at a time.
Fill the water tank with cold water only.
Remove all water from the tank before putting the cleaner away.
Read more : http://www.morck-cleaning.com/product_cat_list/Steam-Cleaner-c19750.html
没有评论:
发表评论