A pressure washer is less sophisticated than it sounds. It's really just a water pump powered by an electric motor. The washer takes in ordinary water from a faucet (that's a tap to you folks in the UK), the pump accelerates the water to high pressure, and then squirts it from a hose at speed through a trigger gun. You can fit various other attachments to the end of the hose for cleaning different things.
This is the tube that runs out from the washer to whatever cleaning attachment you've decided to use. An ordinary bit of tubing wouldn't be able to survive the high-pressure of the water flowing through it. High-pressure hose is reinforced with wire mesh and has two or more layers of high-density plastic. It's important to use hose that has a higher pressure rating than the pump in your pressure washer but, if your washer came with your own hose, there shouldn't be anything to worry about. Typically, the safety margin on pressure-washer hoses is about 300 percent,
High pressure washers have additional features. Water and electricity are not a good mix, so many power washers have ground-fault circuit breakers, also known as residual current devices (RCDs), built into the power supply to protect you in case of an electrical fault. Most washers work in the same way and do exactly the same kind of thing, but the more expensive ones tend to operate at higher water pressures (and have better cleaning power).
High Pressure Washer MK-4205T-R |
没有评论:
发表评论