How to Clean the Floor With a Morck Steam Mop?

The Morck Steam Mop uses heat to lift away stubborn stains on your hard floors.

The Morck Steam Mop is a cleaning tool for hardwood and laminate floors that cleans and disinfects through the use of steam. Water from the reservoir tank is heated and steam is pumped through a microfiber cleaning cloth that lifts away dirt and stubborn messes.

Things You'll Need：

--Distilled water

--Morck Steam Mop

Instructions

1.Sweep your floors to remove any loose dirt.

2.Remove the water reservoir from the Morck Steam Mop and fill it with distilled water.

3.Unwrap the power chord from the back of the machine and plug into a standard electrical outlet. The green power "On" light will light up.

4.Allow your Morck Steam Mop to set for at least 30 seconds to heat up and prepare the steam.

5.Pump the handle of the steam mop a couple of times to release steam and dampen the bottom of the microfiber cleaning cloth.

6.Mop in a forward and backward motion to pump the handle as you mop and release more steam.

7.Stop mopping when the job is finished or the steamer runs out of water. You will notice the Morck Steam Mop is out of water when it no longer emits steam. Refill the tank if necessary.

8.Unplug the Morck Steam Mop. Remove the water tank if there is any leftover liquid and dispose of it in the sink.

9.Remove the microfiber cleaning pad from the bottom of the steamer and wash in the washing machine. Allow to air dry.

Tips & Warnings

Using plain tap water instead of distilled water can cause hard water buildup in your machine and will require more frequent cleaning.

Read more : http://www.morck-cleaning.com/products_info/Steam-cleaner-MK-JJB-307-274965.html